Javascript required
Skip to content Skip to sidebar Skip to footer
Home / Error 0xc00d3e8e the Property Is Read Only

Error 0xc00d3e8e the Property Is Read Only

SP Flash Tool is a flashing application that helps to take a fill-in of your device's firmware or wink the firmware back to your device. It is compatible with the MediaTek powered devices and works with most all the MediaTek Devices similar Smartphones, Smartwatches, etc. Tough the application is simple to utilise, merely it throws many errors without the proper information. So, today we are going to share the list of SP Flash Tool errors (BROM Errors) and give their meanings and solutions to fix them. We have covered almost all the SP Flash Tool errors on this folio, and if we have missed any, so you can post them in the comment section below.

Complete List of SP Flash Tool Error Codes and their Meanings and Solutions

So, let'south now proceed to prepare SP Flash Tool or Fix BROM Errors on your PC.

Table of Contents

  • 1 How to Fix SP Flash Tool Errors (BROM Error Codes):
    • ane.1 SP Flash Tool Failed to enumerate COM Port
    • 1.2 The device automatically disconnects during flashing
    • 1.iii SP Flash Tool remains at 0%
    • 1.4 Error: Initialize besprinkle file failed. Please cheque the besprinkle file proper name you load is legal
    • 1.5 Error: USB device not recognized
    • 1.vi Error: Please select 1 ROM at to the lowest degree before execution
    • i.seven Mistake: PRO_INFO: Failed to get PMT info
    • one.8 Error 1002: S_INVALID_ARGUMENTS
    • 1.ix Error 1012: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)
    • 1.ten Mistake 1003: S_COM_PORT_OPEN_FAIL (1003)
    • 1.11 Error 1013: BROM Error: S_COM_PORT_OPEN Neglect (1013)
    • ane.12 Fault 1011: S_NOT_ENOUGH_STORAGE_SPACE
    • 1.xiii Fault 1022:
    • i.14 Fault 1040: S_UNSUPPORTED_OPERATION (1040)
    • 1.fifteen Error 1042: BROM Mistake: S_TIMEOUT (1042)
    • 1.sixteen Error 2: BROM Fault: ?? (ii)
    • i.17 Fault 4008: BROM Fault : S_FT_DOWNLOAD_FAIL (4008)
    • 1.18 Fault 2004: BROM Mistake : S_FT_DOWNLOAD_FAIL (2004)
    • 1.19 Mistake 2005: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
    • 1.20 Mistake 2020: BROM Error : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
    • 1.21 Fault 3001: S_DA_EXT_RAM_ERROR
    • 1.22 Error 3012: NAND_FLASH_NOT_FOUND
    • ane.23 Fault 3140: BROM Fault: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED
    • 1.24 Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)
    • 1.25 Error 3149: BROM Fault : S_DA_SDMMC_WRITE_FAILED (3149)
    • 1.26 Error 3168: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3168)
    • 1.27 Error 3182: BROM ERROR: S_STORAGE_NOT_MATCH (3182)
    • 1.28 Error 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)
    • 1.29 Error 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)
    • 1.thirty Fault 4001: S_FT_DA_NO_RESPONSE or Da didn't send response data to Flash Tool
    • 1.31 Fault 4004: Driver Error
    • ane.32 Fault 4009: S_FT_READBACK_FAIL (4009)
    • ane.33 Error 4010: BROM Fault : S_FT_FORMAT_FAIL
    • 1.34 Error 4017: BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)
    • 1.35 Mistake 4032: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
    • 1.36 Error 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL
    • 1.37 Error 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
    • 1.38 Error 5002: S_INVALID_DA_FILE
    • 1.39 Mistake 5007: BROM Fault : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
    • 1.xl Error 5054: BROM Mistake S_DL_GET_DRAM_SETTINGS_FAIL (5054)
    • 1.41 Fault 5069: BROM Error : S_DL_PMT_ERR_NO_SPACE (5069)
    • i.42 Error 5056: BROM Fault : S_DL_PMT_ERR_NO_SPACE (5056)
    • 1.43 Fault 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR
    • i.44 Error 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)
    • 1.45 Mistake 6010: BROM ERROR: SP FLASHTOOL Mistake 6010 CODE DOWNLOAD FORBIDDEN
    • 1.46 Error 6012: BROM Mistake: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00
    • ane.47 Error 6047: BROM Fault: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL
    • 1.48 Error 6124: BROM Error: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR CODE: 0X00
    • 1.49 Error 8038: Error 8038! Android download pmt is ready, and layout has been changed / PMT changed for the ROM
    • i.50 Error 8100:
    • i.51 Mistake 8200:
    • 1.52 Error 8406: SP Flash TOOL Error (8406)
    • ane.53 Fault 8417: BROM Fault: Initialize besprinkle file failed. Please check the scatter file name you load is legal
    • 1.54 Stuck at Download DA 100%
    • 1.55 SP Flash Tool flashing process was successful, but the telephone's calibration doesn't work
    • 1.56 USB device not recognized
    • 1.57 Mistake 0xFDA: BROM Error: S_FT_GET_MEMORY_FAIL (0xFDA)
    • 1.58 Error 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
    • i.59 Fault 0x3: BROM Mistake:?? (0x3)
    • 1.60 Error 0x7D4: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
    • ane.61 Error 0x8: BROM Fault:?? (0x8)
    • one.62 Error OXFC0: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
    • 1.63 Error 0X411: BROM Mistake: S_CHKSUM_ERROR (0X411)
    • one.64 Error 0xFA1: BROM ERROR: S_FT_DA_NO_RESPONSE (0xFA1)
    • one.65 TOOL DL image Neglect!
    • 1.66 Mistake 0xFC0: BROM Fault: S_FT_ENABLE_DRAM_FAIL (0xFC0)
    • 1.67 Mistake 0xC0050003: BROM Error: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
    • i.68 Error 0xc002002A: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)
    • 1.69 Mistake 0XFA8: BROM Mistake: S_FT_DOWNLOAD_FAIL (0XFA8)
    • 1.seventy Error 0x7D5: BROM Fault: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
    • 1.71 Mistake: Boundary Check Failed: rom_end_addr >= next rom begin_addr.
    • i.72 Error 3179: BROM Error: S_CHIP_TYPE_NOT_MATCH (3179)
    • one.73 Mistake 5073: BROM ERROR: S_DL_READ_PT_FAIL (5073)
    • 1.74 SP Flash Tool force-closes when scatter file is loaded
    • 1.75 Storage type mismatch!
    • 1.76 Fault 8045: No Valid Partition Management Table (PMT) for storage
    • 1.77 Error 1041: BROM Error: S_CHKSUM_ERROR (1041)
    • i.78 Error 6126: BROM Mistake: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE CODE: 0x00
    • 1.79 Error 6128: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR CODE: 0X00
    • 1.80 Fault 0xC0050005: Error STATUS_EXT_RAM_EXCEPTION (0xC0050005)
    • ane.81 Fault (3): BROM Error:?? (3)
    • 1.82 Error 6104: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE: 0X00
    • 1.83 Error 3183: BROM ERROR: S_CHIP_TYRE_NOT_MATCH (3183)
    • 1.84 Error 0xC0060001: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
    • i.85 Error: PMT changed for the ROM; it must be downloaded
    • 1.86 Error 6004: ERROR: S_SECURITY_SLA_FAIL (6004), MSP ERROE Lawmaking: 0X00
    • i.87 Mistake 6045: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045), MSP ERROE Lawmaking: 0x00
    • 1.88 Fault 2035: BROM Mistake: S_BROM_CMD_JUMP_DA_FAIL (2035)
    • 1.89 Error 0x412: BROM Fault: S_TIMEOUT (0X412)
    • ane.ninety Error 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE: 0x00
    • 1.91 Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]
    • 1.92 Error 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)
    • 1.93 Mistake 0xC52: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)
    • one.94 Error 0XFAA: BROM Mistake: S_FT_FORMAT_FAIL (0XFAA)
    • 1.95 Error 5072: Error: S_DL_WRITE_PT_FAIL (5072)
    • 1.96 Error 0xC0070004: Fault: STATUS_DA_HASH_MISMATCH (0xC0070004)
    • one.97 Error 6046: BROM ERROR: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP ERROR CODE: 0X0
    • 1.98 Fault 0XC0060003: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
    • 1.99 Error 0x94010000: CHIP Blazon Not friction match! target refuse value: 0x94010000
    • ane.100 Mistake 0xC0020029: BROM Fault: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)
    • 1.101 Fault 5000: BROM ERROR: S_AUTH_HANDLE_IS_NOT_READY (5000)
    • 1.102 Fault 0xC002002C: ERROR: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)
    • 1.103 Mistake 0xC0030012: Error: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)
    • 1.104 Error 0xC0060005: ERROR: STATUS_BROM_CMD_FAIL (0xC0060005)
    • 1.105 Mistake viii: ERROR: ?? (viii)
    • i.106 Error 0xC0030001: Fault: STATUS_SCATTER_FILE_INVALID (0xC0030001)
    • 1.107 Error: Sectionalisation[nvram] should NOT gear up "is_download" to truthful in scatter file
    • 1.108 Mistake 0xC0050001: Fault: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
    • 1.109 Error 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)
    • 1.110 Error 5014: ERROR: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)
    • one.111 Mistake 0x7F3: BROM Fault: S_BROM_CMD_JUMP_DA_FAIL
    • 1.112 Mistake 3154: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3154)
    • 1.113 Error 0xC0010005: BROM ERROR: STATUS_PROTOCOL_ERR (0xC0010005)
    • ane.114 Fault 0xC0010007: BROM ERROR: INSUFFICIENT_BUFFER (0xC0010007)
    • one.115 Error 0xC0050007: Mistake: STATUS_READ_DATA_EXCEPTION (0xC0050007)
    • 1.116 Error 0x13CD: BROM Fault: S_DL_PMT_ERR_NO_SPACE (5069)
    • i.117 Mistake: LIB DA not match, please re-select DA or ask for assist
    • ane.118 Error -1073283068: BROM Mistake: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE CODE: 0X00
    • i.119 Fault 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)
    • i.120 Mistake 3152: S_DA_SDMMC_CONFIG_FAILED (3152)
    • one.121 Mistake 0xC0020006: ERROR: STATUS_SEC_PL_VFY_FAIL (0xC0020006)
    • 1.122 Error 0xC0030003: ERROR: STATUS_DA_SELECTION_ERR (0xC0030003)
    • 1.123 Error 0xC0030008: Fault: STATUS_INVALID_GPT (0xC0030008)
    • i.124 Error 0xC0050004: Mistake: STATUS_UPLOAD_EXCEPTION (0xC0050004)
    • i.125 Fault 0x1: ERROR: ?? (0x1)
    • 1.126 Error 0xC0030004: Error: STATUS_PRELOADER_INVALID 0xC0030004
    • i.127 Error 1003: Error: S_INVALID_BBCHIP_TYPE (1003)
    • 1.128 Mistake 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
    • i.129 Mistake 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)
    • 1.130 Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Where to Download SP Flash Tool Latest and Older Versions?

Download the latest and older versions of the SP Flash Tool from Get SP Flash Tool.

How to Set up SP Flash Tool Errors (BROM Mistake Codes):

SP Flash Tool Failed to enumerate COM Port

This error conspicuously means that the Wink Tool has issues finding the COM port on which your device is continued.

Solution:

  1. Brand sure to run SP Wink Tool as ambassador on your estimator. (A viewer suggested this solution, as it helped him fix the failed to enumerate COM Port effect.)
  2. Connect your sentinel to another Port and make sure yous have USB Drivers installed.
  3. Open "Device Director" and find the COM port of the device y'all connected. Once found, open up Flash Tool, click on Options -> COM Port -> Select the COM Port on which you have connected your device.

The device automatically disconnects during flashing

Pregnant: Device disconnects equally soon as the flashing process begins, interrupting the procedure.

Solution:

  1. Endeavor a unlike USB Cord, USB Port & PC
  2. Agree the Volume Downwards or Up button while connecting the device to the PC for flashing

SP Flash Tool remains at 0%

Solution:

  1. Install necessary MediaTek VCOM drivers on PC.
  2. Use the latest version of SP Flash Tool - Download

Follow the troubleshooting guide on how to fix the Flash tool Stuck at 0% (waiting) event.

Fault: Initialize scatter file failed. Please check the scatter file name yous load is legal

Meaning: SP Wink Tool doesn't accept the proper name of the scatter file.

Solution:

  1. Make sure the besprinkle file was not renamed.
  2. Try a higher version of SP Flash Tool [Download]

Error: USB device not recognized

This fault occurs while you connect your device to the PC. Information technology shows a prompt on the arrangement tray afterwards connecting your device.

Meaning: PC is having trouble communicating with your device (Information technology occurs due to interruption, hardware, or driver problems).

Solution:

  1. Try a unlike USB Cord, USB Port, or PC.
  2. Install the latest MediaTek USB drivers on PC.

Error: Please select one ROM at to the lowest degree before execution

Meaning: SP Flash Tool fails to recognize that in that location is an item ticked.

Solution:

  1. Select the Besprinkle file again and untick all the items which you don't want to flash one past one. Don't apply the checkbox, which un-ticks all the things at once and so checks one by one.

Mistake: PRO_INFO: Failed to become PMT info

Meaning: SP Wink Tool is having problems reading the phone.

Solution:

  1. Use different PC and USB Cable.
  2. Ensure that the telephone is powered off with a charged bombardment inside when connecting.

Note: Some phones require yous to remove the battery while flashing. In this example, Solution 1 is the one you should follow.

Error 1002: S_INVALID_ARGUMENTS

Meaning: Invalid Scatter file.

Solution: Load the correct scatter file.

Mistake 1012: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)

Meaning: The version of SP Flash Tool doesn't support the size(s) of the file(s) in the firmware or ROM.

Solution:

  1. Use the latest version of Flash Tool [Download]

Fault 1003: S_COM_PORT_OPEN_FAIL (1003)

Significant: SP Flash Tool encountered an error while communicating with the device via the target port.

Solution:

  1. Connect the device to a dissimilar USB Port on the PC
  2. Endeavour different versions of SP Flash Tool [Download]
  3. Try using unlike USB Cablevision
  4. Make certain the device's USB port is not damaged

Error 1013: BROM ERROR: S_COM_PORT_OPEN Neglect (1013)

Meaning: SP Flash Tool encountered an error while communicating with the device via the target port.

Solution:

  1. Connect the device to a different USB Port on the PC
  2. Attempt different versions of SP Flash Tool [Download]
  3. Try using unlike USB Cable
  4. Make sure the device's USB port is not damaged

Error 1011: S_NOT_ENOUGH_STORAGE_SPACE

Pregnant: The size of whatsoever function of the firmware is larger than the allotted space (usually a block or core)

Solution:

  1. Modify the version of the SP Flash Tool. Download from hither.

Note: It is learned that this error sometimes occurs on the "raw" versions of the flash tool. So changing the version might assist.

Error 1022:

Meaning: The version of the SP Flash tool is non compatible with your device, or the USB interface is non working.

Solution:

  1. Use the unlike or latest version of SP Flash Tool - Download
  2. Change USB Cable or USB Port.

Error 1040: S_UNSUPPORTED_OPERATION (1040)

Meaning: Wink boot files & Scatter.txt don't match.

Solution:

  1. Make certain the right besprinkle file is loaded.

Error 1042: BROM ERROR: S_TIMEOUT (1042)

Meaning: The flashing process took too long, and the SP Flash Tool encountered a timeout.

Solution:

  1. Try flashing 1 file at a time
  2. Use the latest version of SP Flash Tool [Download]
  3. Use different PC and USB Cable

Fault 2: BROM ERROR: ?? (2)

Meaning: SP Wink Tool was unable to communicate with the device.

Solution:

  1. Try using a different PC (preferably Windows 7)
  2. Install MediaTek USB Drivers on PC
  3. Use another USB Cablevision

Fault 4008: BROM Error : S_FT_DOWNLOAD_FAIL (4008)

Meaning: At that place is an interruption betwixt the SP Wink Tool and the device communication, and the SP Flash Tool encountered an error while flashing files.

Solution:

  1. Take out the battery and re-insert it back.
  2. Use unlike USB Cable, Port, and PC.
  3. Correct click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe as ambassador.
  4. Make certain the battery has plenty charge left.

Error 2004: BROM Mistake : S_FT_DOWNLOAD_FAIL (2004)

Pregnant: There is an pause between the SP Wink Tool and the device communication, and the SP Flash Tool encountered an error while flashing files.

Solution:

  1. Accept out the battery and re-insert information technology dorsum.
  2. Utilise unlike USB Cable, port, and PC.
  3. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe as ambassador.
  4. Make certain the battery has enough charge left.

Error 2005: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Meaning: Device attempted to power on before SP Flash Tool could flash the files to it.

Solution:

  1. Take out the battery and re-insert it dorsum.
  2. Apply different USB Cable, port, and PC.
  3. Right click flash_tool.exe -> Backdrop -> Compatibility -> Set to Windows XP Service Pack 3 -> Apply -> OK -> Run flash_tool.exe as administrator.
  4. Make sure the bombardment has enough charge left.

Error 2020: BROM Fault : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)

Meaning: Flash Tool encountered a problem moving files to be flashed to the device's internal SRAM.

Solution:

  1. use the latest version of the SP wink tool [Download Here]
  2. In SP flash tool, navigate to Options > Choice > Connection > Bombardment. Fix it to "with battery".
  3. Employ the Format all + Download option
  4. Hold both volume buttons earlier connecting to the PC for flashing and release once flashing begins

Error 3001: S_DA_EXT_RAM_ERROR

The SP Flash Tool Error 3001 occurs due to connection issues. Check the cable and reconnect to another port. If it still occurs, try using a different PC.

Error 3012: NAND_FLASH_NOT_FOUND

Meaning: Trouble associated with the definition of flash retentiveness.

Solution:

  1. Use the different version of flash tools - Download
  2. Use different PC, USB Cablevision, and USB Port.

Error 3140: BROM Fault: S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED

Significant: SP flash tool encountered an error flashing a selected file to a non-specified partition

Solution:

  1. Use the latest version of SP Wink Tool - Download
  2. Use format option and then download in SP Flash Tool

Error 3144: S_DA_EMMC_FLASH_NOT_FOUND (3144)

Meaning: Flash boot files and scatter mismatch. Annotation EMMC division device and MTD partition device use unlike TXT kicking files.

Solution:

  1. Cull the correct Scatter file.
  2. Use a unlike PC (preferably Windows XP) with all the drivers loaded.

Fault 3149: BROM Fault : S_DA_SDMMC_WRITE_FAILED (3149)

Meaning: SP Wink tool is unable to flash files to the device.

Solution:

  1. Use the latest version of the SP flash tool and run information technology equally ambassador. [Download hither]
  2. Format outset then Download
  3. Don't tick a box with an unspecified/empty file path
  4. Ensure the phone is switched off and has enough charge before connecting to the PC for flashing
  5. Endeavour a different PC
  6. Try a different ROM
  7. Endeavor a unlike USB cord
  8. Try formatting the phone get-go earlier flashing files to information technology

Error 3168: BROM Fault: S_CHIP_TYPE_NOT_MATCH (3168)

Meaning: SP Flash Tool detects that there is a mismatch between the information provided in the scatter file and the device's info.

Solution:

  1. Brand sure you are using the correct ROM file for your device.
  2. Utilize the higher version of SP Flash Tool - Download hither
  3. Install right drivers on PC.

Error 3182: BROM ERROR: S_STORAGE_NOT_MATCH (3182)

Meaning: The firmware you are trying to flash is non compatible with your device.

Solution: Endeavour getting the appropriate firmware for your device model.

Fault 3167: BROM_ERROR: S_STORAGE_NOT_MATCH (3167)

Meaning: The firmware you lot are trying to wink is not uniform with your device.

Solution: Endeavour getting the appropriate firmware for your device model.

Error 3178: BROM_ERROR: S_STORAGE_NOT_MATCH (3178)

Significant: The firmware y'all are trying to flash is not uniform with your device.

Solution: Try getting the advisable firmware for your device model.

Error 4001: S_FT_DA_NO_RESPONSE or Da didn't transport response information to Flash Tool

Meaning: SP Wink Tool facing problem communicating with the device.

Solution:

  1. Use a different USB Port.
  2. Install MediaTek VCOM drivers on PC.
  3. Run Flash_tool.exe as administrator.
  4. Use a different PC (preferably Windows 7 or XP).
  5. Try unlike USB Cablevision.

Error 4004: Driver Error

Meaning: Drivers not found or corrupted.

Solution: Uninstall drivers and re-install them.

Error 4009: S_FT_READBACK_FAIL (4009)

Significant: SP Flash Tool failed to create a Readback file, possibly due to not enough space for a file or file cannot be overwritten considering it is locked.

Solution:

  1. Use the unlike version of SP Flash Tool [Download]
  2. Delete old Readback files

Error 4010: BROM ERROR : S_FT_FORMAT_FAIL

Meaning: The blocks map in the besprinkle file doesn't match the device'south sectionalisation sizes

Solution:

  1. Employ the correct firmware for your device model.
  2. Apply the latest version of SP Flash Tool [Download]

Error 4017: BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)

Pregnant: You're trying to flash a file that has not been processed for flashing via the SP wink tool

Error 4032: BROM Mistake : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Meaning: The firmware y'all're trying to flash is either not uniform with your device or you lot accept selected the wrong flashing settings

Solution:

  1. Ensure that the firmware you are flashing is made for your device model.
  2. Delete the SP Wink Tool binder and re-excerpt information technology.
  3. Ensure y'all tick the boxes for only the files present in the ROM yous're near to wink
  4. Might take the incorrect driver installed. Uninstall the VCOM, Preloader, and MTK drivers and re-install them.

Fault 4050: S_FT_NEED_DOWNLOAD_ALL_FAIL

Significant: The SP Flash Tool Error Code 4050 occurs when block sizes are non the same in the PMT and besprinkle. In full general, this error is treated to download all the blocks (one can utilise data plenty), then the size in the PMT should switch to the right.

Solution:

  1. Use a dissimilar version of Flash Tool - Download

Error 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)

Meaning: Flash tool was unable to locate the sectionalisation you're trying to wink.

Solution: Un-tick whatever item with a blank or empty location

Error 5002: S_INVALID_DA_FILE

Meaning: The Download Agent (DA) file selected is not compatible. DA file is fastened to the Wink Tool release, so choose the one which is provided in the Wink Tool folder.

Solution:

  1. Choose the DA file from the SP Flash Tool folder.

Error 5007: BROM Mistake : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Pregnant: You're trying to flash a file with the unspecified path (no file selected in the item box)

Solution:

  1. Brand sure the scatter file is in the same binder where the other files to be flashed are located.
  2. Untick any item whose file yous practice not have or whose path is not specified.

Error 5054: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Meaning: The files you are trying to wink are not uniform with the device.

Solution:

  1. Ensure y'all are using the correct files.

Mistake 5069: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the available partition size.

Solution:

  1. Ensure that you are flashing the correct files to the device.
  2. Attempt another ROM.

Error 5056: BROM Mistake : S_DL_PMT_ERR_NO_SPACE (5056)

Meaning: The size of a file is larger than the available partition size.

Solution:

  1. Ensure that you are flashing the correct files to the device.
  2. Try another ROM.

Error 5066: S_DL_PC_BL_INVALID_GFH_FILE_INFOR

Meaning: Wrong files. The Besprinkle file of the chosen binder is not still prepared for the FT files.

Solution:

  1. Choose the correct scatter file prepared for the FT files.

Mistake 5095: S_DL_MAUI_FLASH_ID_NOT_MATCHED_WITH_TARGET (5095)

Meaning: When you choose the wrong file, for example, another type of flash downloads into the current flash, the tool will warn with this message. The chosen flash files are non compatible with your device.

Error 6010: BROM ERROR: SP FLASHTOOL Error 6010 CODE DOWNLOAD FORBIDDEN

Meaning: The device has a protected or locked bootloader.

Solution: Unlock the bootloader on your device.

Error 6012: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR Lawmaking: 0X00

Meaning: The Download-Agent beingness used is incompatible with the device.

Solution: Set Download-Agent to MTK_AllInOne_DA.bin

Error 6047: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL

Significant: Hash (integrity) check of the files beingness flashed failed.

Solution:

  1. Use SP Flash Tool V5.1516.00 from here
  2. Select the right Download Agent file
  3. Navigate to Options > Pick > Download and untick DA DLL All…

Mistake 6124: BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR Code: 0X00

Meaning: Incorrect flash settings or firmware.

Solution:

  1. Use the correct firmware for your verbal device model
  2. Select the correct Download Agent file in the SP flash tool
  3. Get to Options > Option > Connexion > USB Speed > Full Speed
  4. Go to Options > Option > Download > Untick DA DL All with Checksum

Error 8038: Fault 8038! Android download pmt is ready, and layout has been inverse / PMT changed for the ROM

Meaning: SP Wink Tool is having problem writing to certain partitions due to some incompatibility.

Solution:

  1. Format the phone in the SP flash tool (Do not format bootloader) then try flashing the files again using Download
  2. If Download doesn't work then do a firmware upgrade
  3. If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
  4. If that isn't feasible, try formatting first or use the firmware upgrade
  5. If that doesn't work, open the scatter file using Notepad++ and alter __NODL_FAT to FAT by removing "__NODL_".

Error 8100:

Meaning: Cannot find the USB port.

Solution:

  1. Install the Drivers. If already installed, uninstall them and re-install them again.

Error 8200:

Significant: Invalid file or incompatible recovery file.

Solution:

  1. Find the right recovery file.
  2. Employ the latest version of the SP Flash Tool. [Download Here]

Error 8406: SP Flash TOOL Error (8406)

Meaning: Compatibility issues.

Solution:

  1. Flash the correct firmware for your exact device model.
  2. Update VCOM drivers.

Error 8417: BROM Error: Initialize scatter file failed. Please check the scatter file name y'all load is legal

Significant: The format of the Scatter file is invalid.

Solution:

Open the scatter file in Notepad++, the offset line must showtime with:

############################################################################################################## General Setting #

If there is anything else above this then delete it and save the scatter file.

Stuck at Download DA 100%

Meaning: SP Wink Tool is having trouble communicating with your device.

Solution:

  1. Uninstall and re-install MediaTek drivers.

SP Flash Tool flashing process was successful, but the phone'south calibration doesn't work

If, later flashing the files using SP Flash Tool soft keys and impact doesn't work or respond, follow the below solution.

Solution:

Edit the scatter file using Notepad++ and remove the NODL_ (or set is_download: simulated to is_download: truthful) in front of the items you have in the backup folder just aren't listed when y'all load the scatter file in the SP flash tool. Removing NODL_ or setting is_download to truthful makes the item listed/available in the SP wink tool when you load the scatter file after saving information technology.

USB device not recognized

Significant: The PC is having trouble communicating with your device because of interruption, hardware, or driver problem.

Solution:

  1. Remove and install the MediaTek MTK drivers over again on your PC.
  2. Try a different USB cable.
  3. Connect the device to a different USB Port.
  4. If the in a higher place solutions don't piece of work, try using another PC.

Error 0xFDA: BROM Fault: S_FT_GET_MEMORY_FAIL (0xFDA)

Significant: SP Wink Tool encountered an error reading your device'southward storage.

Solution:

  1. Try a different USB cable.
  2. Connect the device to a unlike USB Port.
  3. If the above solutions don't work, try using some other PC.

Mistake 0x13BE: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

Pregnant: The firmware you are trying to flash is either not compatible or you accept selected the incorrect flashing settings.

Solution:

  1. Brand sure that the firmware you are trying to wink is actually for your device model.
  2. Only tick the boxes only for the files which are available in the ROM folder you're trying to flash.

Error 0x3: BROM Fault:?? (0x3)

Pregnant: SP flash tool encountered an fault maintaining the connection with the device during the flashing process.

Solution:

  1. Uninstall and re-install MTK VCOM drivers on your PC.
  2. Try a different USB cable.
  3. Connect the device to a unlike USB Port.
  4. If the above solutions don't piece of work, try using another PC.

Fault 0x7D4: BROM Fault: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)

Meaning: SP Flash Tool encountered an error writing to the device.

Solution:

  1. Try changing the Download Agent (Secure Boot DA) file.
  2. Use the latest version of SP Wink Tool – Download here.
  3. Make certain that your device'south battery is sufficiently charged.
  4. Brand certain the device'south USB port is not damaged.
  5. Ensure that the file names friction match what'southward in the scatter file.
  6. Try a different USB cable.
  7. Connect the device to a different USB Port.
  8. If the in a higher place solutions don't work, try using another PC.

Mistake 0x8: BROM ERROR:?? (0x8)

Meaning: The size of the file you are trying to wink is larger than the partitioning size.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's exact model.
  2. Try another Stock ROM.
  3. Change the phone's EMMC chip.
  4. Endeavour using a unlike PC.

Error OXFC0: BROM Error S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware you lot're trying to flash is either not compatible with your device or you have selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to wink are really for your device's exact model.
  2. Just tick the boxes only for the files which are available in the ROM you're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Use the latest version of the Smartphone Flash Tool.
  5. Delete the SP Wink Tool folder and re-extract it.
  6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the above solution doesn't piece of work, then y'all tin can try property down the Volume Downwardly button and connect the phone to the PC. You tin besides try belongings Volume Up, Power and Volume Downwardly, Ability, and Volume Upwards buttons.
  8. Format the phone from Settings before trying to flash the files again.

Error 0X411: BROM ERROR: S_CHKSUM_ERROR (0X411)

Meaning: There was a checksum mistake when flashing the firmware.

Solution:

  1. Delete any file with the checksum in its name from the ROM/firmware folder.
  2. Go to Options > Selection > Download > United nations-tick DA DL all with checksum.

Error 0xFA1: BROM Mistake: S_FT_DA_NO_RESPONSE (0xFA1)

Meaning: SP wink tool encountered an mistake communicating with the device.

Solution:

  1. Install MTK VCOM drivers on your PC. If already installed, uninstall and re-install them.
  2. Ensure that the device is powered off and has charged battery inserted.
  3. Do not hold any button when connecting the device to the PC for flashing.
  4. Endeavor a unlike USB cable.
  5. Connect the device to a different USB Port.
  6. If the higher up solutions don't piece of work, endeavor using another PC.

TOOL DL paradigm Fail!

Pregnant: DA DL all with the Checksum option, is disabled in the SP wink tool.

Solution:

  1. In SP Flash Tool, navigate to Options > Option > Download > Tick DA DL all with checksum and re-flash the firmware.

Mistake 0xFC0: BROM ERROR: S_FT_ENABLE_DRAM_FAIL (0xFC0)

Meaning: The firmware you're trying to flash is either not uniform with your device or y'all have selected the wrong flashing settings.

Solution:

  1. Ensure that the files yous're trying to flash are really for your device'southward exact model.
  2. Simply tick the boxes only for the files which are available in the ROM you're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Use the latest version of the Smartphone Flash Tool.
  5. Delete the SP Wink Tool folder and re-extract it.
  6. Ensure that the phone is powered off (with the battery inserted) before connecting to the PC for flashing.
  7. If the above solution doesn't work, then y'all can try holding down the Volume Down button and connect the telephone to the PC. Yous can also endeavour holding Volume UP, Power and Volume Downward, Power, and Book Upward buttons.
  8. Format the telephone from Settings before trying to flash the files again.

Error 0xC0050003: BROM Fault: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)

Meaning: SP flash tool encountered an error writing to one or more partitions.

Solution:

  1. Download the latest version of the Smart Phone Flash Tool and re-flash the firmware.
  2. Try flashing i partition at a time to figure out which partition is resulting in the error.
  3. Try a dissimilar USB cable.
  4. Connect the device to a different USB Port.
  5. If the to a higher place solutions don't piece of work, attempt using another PC.

Error 0xc002002A: BROM Mistake: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)

Pregnant: The firmware you're trying to flash is either non compatible with your device, or you accept selected the wrong flashing settings or verified boot is enabled.

Solution:

  1. Unlock the bootloader before flashing the firmware.
  2. Ensure that the files yous're trying to wink are actually for your device's exact model.
  3. Only tick the boxes only for the files which are available in the ROM you're trying to flash.
  4. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  5. Apply the latest version of the Smartphone Wink Tool.
  6. Delete the SP Flash Tool folder and re-extract it.
  7. Ensure that the telephone is switched off (with the bombardment inserted) earlier connecting to the PC for flashing.
  8. If the above solution doesn't work, then yous tin try holding downwards the Volume Down button and connect the telephone to the PC. Y'all can likewise endeavor holding Volume UP, Power and Book Down, Power, and Volume Upwardly buttons.
  9. Format the telephone from Settings before trying to flash the files again.

Error 0XFA8: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)

Significant: SP flash tool encountered an fault while attempting to flash the firmware.

Solution:

  1. Make sure that the device is switched off, and the bombardment is in the device before connecting for flashing.
  2. Utilise the format selection and then download it in the SP flash tool.
  3. Endeavor irresolute the Download Amanuensis setting in Smartphone Wink Tool.
  4. Try a different USB cablevision.
  5. Endeavour connecting the device to a different USB Port.
  6. Endeavor using a different PC.

Error 0x7D5: BROM Fault: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

Meaning: The device attempted to power on before the SP flash tool could flash the files to it.

Solution:

  1. Make sure the battery is sufficiently charged on your device.
  2. Take out and re-insert the battery.
  3. Try using a unlike USB cable or COM port or PC.
  4. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack three -> Apply -> OK -> Run flash_tool.exe every bit administrator.
  5. Practice not hold any button when connecting to the PC.

Error: Boundary Bank check Failed: rom_end_addr >= next rom begin_addr.

Pregnant: The firmware has a partition that wasn't included while backing up the firmware. SP Wink Tool encountered an error in the terminate address of the preloader partition and the begin address of the PGPT segmentation (i.e., the division which wasn't included in the backup).

Solution:

  1. Shut the error message and manually select the location of all the files in the besprinkle file from the lesser to the top. Meaning that a preloader would be the last thing you will select.
  2. If that doesn't work, open up and change the scatter file using Notepad++ then modify the "boundary_check: True" to "boundary_check: False".

Error 3179: BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3179)

Meaning: The firmware you lot're trying to flash is either not compatible with your device or you have selected the incorrect flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are actually for your device's verbal model.
  2. Only tick the boxes only for the files which are available in the ROM you're trying to flash.
  3. Uninstall the VCOM, Preloader, and MTK drivers and re-install them on your PC.
  4. Utilise the latest version of the Smartphone Wink Tool.
  5. Delete the SP Flash Tool folder and re-excerpt information technology.
  6. Ensure that the phone is powered off (with the battery inserted) earlier connecting to the PC for flashing.
  7. If the in a higher place solution doesn't work, then you tin endeavor holding down the Volume Down push button and connect the phone to the PC. You can also try property Book UP, Power and Volume Down, Ability, and Volume UP buttons.
  8. Format the phone from Settings before trying to flash the files again.

Mistake 5073: BROM ERROR: S_DL_READ_PT_FAIL (5073)

Meaning: Smartphone wink tool encountered an error while trying to format the device.

Solution:

  • Utilise "download only" nether the download tab to flash the firmware, and then y'all tin can format the device if needed.

SP Flash Tool force-closes when scatter file is loaded

Pregnant: SP Flash Tool doesn't support the scatter file because of its blocks or configuration.

Solution:

  • Open up the besprinkle file using Notepad++ and locate the last segmentation on the list (flashinfo) and alter the is_download: true to is_download: faux. Once done, save the scatter file and reload information technology in SP Wink Tool.

Storage type mismatch!

Bulletin:

scatter storage blazon is HW_STORAGE_EMMC

target storage type is HW_STORAGE_NAND

(or)

scatter storage blazon is HW_STORAGE_EMMC

target storage type is HW_STORAGE_NONE

Meaning: There is a mismatch betwixt the device's storage type and that which the scatter file expects.

Solution:

  1. Attempt using a different firmware or ROM.
  2. Try using SP Flash Tool version 3.10. If it doesn't work, try using different versions and make sure to run it as administrator.

Fault 8045: No Valid Partition Management Tabular array (PMT) for storage

Pregnant: SP Flash Tool failed to identify the device'southward partition ahead of the file writes.

Solution:

  • Try flashing the firmware using Download only.

Error 1041: BROM ERROR: S_CHKSUM_ERROR (1041)

Significant: There was a checksum mistake when flashing the firmware.

Solution:

  1. Delete whatever file with the checksum in its name from the ROM/firmware folder.
  2. Get to Options > Pick > Download > United nations-tick DA DL all with checksum.

Error 6126: BROM Error: S_SECURITY_SECRO_HASH_INCORRECT (6126), MSP ERROE CODE: 0x00

Meaning: The ROM contains a checksum file, but DA DL All With CheckSum is un-checked.

Solution:

  • Tick DA DL All With Check Sum nether Options > Option > Download.

Error 6128: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP Mistake Lawmaking: 0X00

Significant: The ROM contains a checksum file, merely DA DL All With CheckSum is un-checked.

Solution:

  • Tick DA DL All With Check Sum under Options > Option > Download.

Error 0xC0050005: Fault STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Pregnant: The firmware yous're trying to flash is either not compatible with your device or you take selected the wrong flashing settings.

Solution:

  1. Ensure that the files you're trying to flash are really for your device's exact model.
  2. But tick the boxes merely for the files which are available in the ROM you're trying to flash.
  3. Make sure your device'southward battery is sufficiently charged.

Error (3): BROM ERROR:?? (3)

Meaning: In that location is a problem with the format of the scatter file or files existence flashed. Example – trying to flash .bin files using SP Flash Tool.

Solution:

  • Bank check the scatter file and firmware files y'all are trying to flash to make sure that they're not meant to be flashed using a different tool.

Fault 6104: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE: 0X00

Meaning: Incorrect flash settings or firmware/ROM files.

Solution:

  1. Make certain you have selected the right Download Agent file in SP Flash Tool and are using the firmware meant for your device's exact model.
  2. Go to Options > Option > Connexion > USB Speed > Full Speed.
  3. Get to Options > Option > Download > un-tick DA DL ALL with Checksum.

Error 3183: BROM ERROR: S_CHIP_TYRE_NOT_MATCH (3183)

Significant: SP Flash Tool believes that at that place is a mismatch betwixt the information provided in the scatter file and device info.

Solution:

  1. Make certain to use the ROM/firmware for the verbal device model.
  2. Try using the college version of the SP Wink Tool.
  3. Uninstall and re-install the MediaTek MTK USB Drivers on your PC.

Fault 0xC0060001: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)

Meaning: The device attempted to power on earlier the SP flash tool could flash the files to it.

Solution:

  1. The device might require a custom Download Agent (DA) to be flashed.
  2. Brand sure the battery is sufficiently charged before flashing.
  3. Have out and re-insert the bombardment.
  4. Effort using a different USB cable or COM port or PC.
  5. Right click flash_tool.exe -> Backdrop -> Compatibility -> Set to Windows XP Service Pack 3 -> Utilise -> OK -> Run flash_tool.exe as administrator.
  6. Practice non hold any button when connecting to the PC.

Error: PMT inverse for the ROM; it must be downloaded

Significant: The partitioning table about to be written (from the besprinkle file) is unlike from the device'southward current sectionalization table layout.

Solution:

  1. Ensure that the scatter file and firmware/ROM files you're trying to flash are for your device'due south exact model.
  2. If you lot're trying to wink only a few files from the firmware, then yous need to become the firmware to complement and so flash using download only.
  3. If you're trying to flash the consummate firmware, so try using the "Firmware Upgrade" choice or Format first before the "download only" option.

Error 6004: Error: S_SECURITY_SLA_FAIL (6004), MSP ERROE CODE: 0X00

Meaning: The Download Agent file isn't uniform with the device.

Solution:

  1. Try using a different Download Agent file.
  2. Try using a different version of the Smartphone Wink Tool.
  3. Ensure you are using the right Authentication file.

Pregnant: The paradigm files you are trying to flash do not incorporate –sign header.

Solution:

  1. Use the SP Flash Tool v5.1532.00 – Download here.
  2. Load the Auth file for the device in the flash tool.
  3. Endeavor flashing a factory-signed firmware.
  4. Flash the unsigned image using the 'Write Memory' tab in SP Flash Tool. To activate the write memory tab, printing 'Ctrl + Alt + V' to enable advanced fashion and then click Window > Write Memory.

Fault 2035: BROM Error: S_BROM_CMD_JUMP_DA_FAIL (2035)

Significant: SP Flash Tool encountered an error connecting to the device.

Solution:

  1. Ensure that the bombardment is inserted, and you're non property any push button when connecting the device to a PC for flashing.
  2. Uninstall and re-install the MediaTek MTK VCOM Drivers.
  3. Disable any modem manager or software which might exist blocking ports on the PC.
  4. Linux / Ubuntu users, brand sure you installed 'libusb-dev' then blacklist Ubuntu's modem managing director (because it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Error 0x412: BROM ERROR: S_TIMEOUT (0X412)

Pregnant: SP Flash Tool encountered a timeout when trying to wink, i.east., flashing took long to start or consummate.

Solution:

  1. Make sure that files are loaded in SP Wink Tool with a valid location. The location should non be empty.
  2. Try flashing 1 file at a fourth dimension.
  3. Try using a higher version of the Smart Phone Flash Tool.
  4. Un-tick larger files or find smaller alternatives.

Error 6029: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE: 0x00

Meaning: SP Flash Tool failed to authenticate the files you are trying to wink.

Solution:

  1. Effort another ROM/firmware from a different source.
  2. Get an Auth file for your device model.
  3. For Tecno, Infinix, and Itel devices, use Software Download Tool (Format + Download).

Error 0x93AF: ROM [logo] checksum mismatch checksum_config[0x93af], checksum_val[0x94ae]

Meaning: The SP Flash Tool Error Code 0x93AF means that the tool encountered a checksum fault.

Solution:

  1. Open the checksum file using Notepad++ and search for 0x93af and supersede it with 0x94ae.
  2. Delete any checksum file from the ROM/firmware files.

Mistake 5011: S_DL_SCAT_INCORRECT_FORMAT (5011)

Meaning: The scatter file has an incorrect format. Information technology has been desperately created or modified.

Solution:

  1. Download a different scatter file that doesn't throw an error in SPFT. Now open the two besprinkle files using Notepad++, and you will detect that the incorrect scatter file has the items slightly shifted to the left. Edit the incorrect scatter file to the same format every bit in the working scatter file.
  2. Subsequently modifying the besprinkle file using the above method, use the latest version of SP Flash Tool e.yard., SP Flash Tool v5.1728.
  3. Download another ROM/firmware from a different source.

Mistake 0xC52: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)

Meaning: SP Flash Tool was unable to flash files to the device.

Solution:

  1. Make sure to employ the latest version of the SP Flash Tool and run it equally ambassador.
  2. Format get-go then Download.
  3. Un-tick the box with an unspecified/empty file path.
  4. Ensure that the battery is sufficiently charged and the device is switched off before connecting to the PC for flashing.
  5. Endeavour a different ROM from a different source.
  6. Try formatting the device starting time before flashing the files.
  7. Try a unlike USB cable.
  8. Connect the device to a dissimilar USB Port.
  9. If the in a higher place solutions don't work, try using some other PC.

Mistake 0XFAA: BROM ERROR: S_FT_FORMAT_FAIL (0XFAA)

Meaning: The source (firmware) doesn't properly friction match with the target (telephone).

Solution:

  1. Try using a unlike firmware for your device model.
  2. Ensure you're using the right tool for flashing the firmware.

Error 5072: Error: S_DL_WRITE_PT_FAIL (5072)

Pregnant: SPFT encountered a problem writing to one or more partitions.

Solution:

  1. Make sure the device is powered off with a charged battery within before connecting to the PC for flashing.
  2. Don't hold whatsoever buttons when connecting to the PC.
  3. Try a different USB cable.
  4. Connect the device to a different USB Port.
  5. If the above solutions don't piece of work, try using another PC.

Mistake 0xC0070004: ERROR: STATUS_DA_HASH_MISMATCH (0xC0070004)

Meaning: Hash (integrity) check for the images being flashed is failed.

Solution:

  1. Employ SP Flash Tool v5.1516.00 – Download from hither.
  2. Make sure to select the correct Download Agent file.
  3. Navigate to Options > Option > Download > Un-tick DA DL all with checksum.

Error 6046: BROM Fault: S_SECURITY_USB_DL_IMAGE_SIGNATURE_VERIFY_FAIL (6064), MSP Fault Code: 0X0

Meaning: The SP Flash Tool Fault Code 6046 refers to the failed signature verification for the firmware files.

Solution:

  1. Select MTK_AllInOne_DA.bin as Download Agent file.
  2. Navigate to Options > Option > Download > Un-tick DA DL all with Checksum.
  3. Delete any checksum file in the ROM/firmware binder.

Mistake 0XC0060003: Mistake: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)

Meaning: Smart Telephone Flash Tool is unable to read or write to the device using the selected Download Agent.

Solution:

  1. The device might crave a custom Download Agent (DA) to be flashed.
  2. Make sure the battery is sufficiently charged earlier flashing.
  3. Take out and re-insert the battery.
  4. Try using a dissimilar USB cable or COM port or PC.
  5. Right click flash_tool.exe -> Properties -> Compatibility -> Set to Windows XP Service Pack iii -> Employ -> OK -> Run flash_tool.exe as ambassador.
  6. Practice not hold any button when connecting to the PC.

Mistake 0x94010000: Bit Blazon Non friction match! target turn down value: 0x94010000

Meaning: The device likely has a locked/encrypted preloader.

Solution:

  • United nations-tick preloader when flashing in SP Flash Tool.

Error 0xC0020029: BROM Error: STATUS_SEC_IMGHDR_TYPE_MISMATCH (0xC0020029)

Pregnant: You lot are trying to flash the modified files to a device that accepts merely signed or verified images.

Solution:

  1. Download and flash the official firmware for your device (normally have –verified or –signed prefixes in their filename).
  2. If possible, unlock the bootloader of your device and so attempt re-flashing.

Fault 5000: BROM Error: S_AUTH_HANDLE_IS_NOT_READY (5000)

Significant: The device has a secure kicking/bootloader.

Solution:

  1. You lot will need an Auth (*.auth) file or custom Download Agent (DA) file for the device to proceed with flashing using SP Flash Tool.
  2. For Tecno, Infinix, and Itel devices, employ Software Download Tool (Format + Download).

Fault 0xC002002C: ERROR: STATUS_SEC_IMG_HASH_VFY_FAIL (0xC002002C)

Meaning: The device has a verified boot.

Solution:

  • Download and wink the official firmware for your device (usually have –verified or –signed prefixes in their filename).

Error 0xC0030012: Error: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)

Significant: The device has a secure boot.

Solution:

  • You will demand an Auth (*.auth) file or custom Download Agent (DA) file for the device to proceed with flashing using SP Wink Tool.

Fault 0xC0060005: Fault: STATUS_BROM_CMD_FAIL (0xC0060005)

Pregnant: The device attempted to power on before the SP Flash Tool could flash files to it.

Solution:

  • You volition need a custom Download Agent (DA) file for your device model.

Mistake 8: ERROR: ?? (8)

Meaning: The size of a file is larger than the available partition size.

Solution:

  1. Brand sure that the firmware files you are trying to flash are actually for your device's verbal model.
  2. Effort some other Stock ROM from a different source.
  3. Alter the device'southward EMMC chip.
  4. Endeavour using a dissimilar PC.

Error 0xC0030001: Error: STATUS_SCATTER_FILE_INVALID (0xC0030001)

Meaning: SP Wink Tool cannot recognize the scatter file or the location of the scatter file.

Solution:

  1. Rename the folder location of the scatter file, including the parent folders too, and remove all special characters / non-English characters from the binder proper noun.
  2. If that doesn't work, then create a new binder on your desktop and copy Just the firmware files to the new folder and then retry flashing the contents from the new folder.

Error: Partitioning[nvram] should NOT set up "is_download" to truthful in besprinkle file

Meaning: The scatter file specifies to download NVRAM only doesn't specify a file name for NVRAM. This error is common in later versions of the SP Wink Tool.

Solution:

  1. Modify the scatter file using notepad++ and add a file name for the NVRAM sectionalisation. e.g., "file_name: nvram.bin" then save and ensure there's a nvram.bin file in the same folder as the scatter file.
  2. If that doesn't work, modify the scatter file using notepad++ and set "is_download: simulated" for the NVRAM partition.

Mistake 0xC0050001: Fault: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)

Meaning: The firmware you lot are trying to flash is either not compatible or you have selected the incorrect flashing settings.

Solution:

  1. Make sure that the firmware you are trying to wink is actually for your device model.
  2. Only tick the boxes just for the files which are available in the ROM folder you lot're trying to flash.
  3. Uninstall and re-install MediaTek Preloader VCOM USB Drivers.

Mistake 0xC002001B: ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)

Meaning: The device has a verified boot.

Solution:

  • Download and wink the official firmware for your device (normally accept –verified or –signed prefixes in their filename).

Error 5014: Error: S_DL_SCAT_ADDR_IS_NOT_ASCENDING_ORDER (5014)

Meaning: The scatter file was badly created or modified, depending on how you lot obtained the scatter file.

Solution:

  • Input the correct values for all "physical_start_addr" in the scatter file. The exact value for "physical_start_addr" is the same as the value of "linear_start_addr".

Mistake 0x7F3: BROM Fault: S_BROM_CMD_JUMP_DA_FAIL

Meaning: SP Flash Tool is having problem communicating with the device.

Solution:

  1. Ensure that the battery is inserted, and you lot're not holding any button when connecting the device to a PC for flashing.
  2. Uninstall and re-install the MediaTek Preloader Drivers.
  3. Disable any modem managing director or software which might be blocking ports on the PC.
  4. Linux / Ubuntu users, brand sure you installed 'libusb-dev' then blacklist Ubuntu's modem manager (because it controls port /dev/ttyACM0, which is causing SP Flash Tool from running properly).

Error 3154: BROM Error: S_DA_SDMMC_WRITE_FAILED (3154)

Significant: SP Flash Tool Error Lawmaking 3154 means that the wink tool is having trouble flashing files to the device.

Solution:

  1. Make sure to utilise the latest version of the SP Flash Tool and run it as administrator.
  2. Format first so Download.
  3. Un-tick the box with an unspecified/empty file path.
  4. Ensure that the battery is sufficiently charged and the device is switched off before connecting to the PC for flashing.
  5. Try a different ROM from a dissimilar source.
  6. Endeavour formatting the device first before flashing the files.
  7. Try a dissimilar USB cable.
  8. Connect the device to a dissimilar USB Port.
  9. If the above solutions don't work, try using another PC.

Error 0xC0010005: BROM ERROR: STATUS_PROTOCOL_ERR (0xC0010005)

Significant: SP flash tool is having trouble communicating with the device.

Solution:

  • Brand certain that the phone is switched off with the bombardment inserted before connecting to the PC for flashing.

Error 0xC0010007: BROM Mistake: INSUFFICIENT_BUFFER (0xC0010007)

Significant: SP Wink Tool seems to be blocked from flashing files to the device.

Solution:

  • If y'all can kick your device into Fastboot Mode, then unlock the bootloader and then try flashing again.
  • United nations-tick OEM and and then retry flashing.

Error 0xC0050007: Mistake: STATUS_READ_DATA_EXCEPTION (0xC0050007)

Significant: SP Flash Tool is unable to readback from the connected device. This error commonly occurs, especially when the readback length is too large.

Solution:

  1. Download and install updated MTK drivers on your PC.
  2. If you're performing a readback, endeavour skipping enshroud and userdata.

Error 0x13CD: BROM Error: S_DL_PMT_ERR_NO_SPACE (5069)

Meaning: The size of a file is larger than the available partition size.

Solution:

  1. Brand sure that the firmware files yous are trying to flash are actually for your device'southward exact model.
  2. Try another Stock ROM from a different source.
  3. Change the device'due south EMMC chip.

Error: LIB DA not match, please re-select DA or ask for help

Meaning: SP Flash Tool is having trouble using the selected Download Agent (DA) file.

Solution:

  1. Un-tick "Bank check LIB DA match" from the SP Wink Tool general settings (Options > Choice).
  2. Endeavor another version of the SP Flash Tool.

Mistake -1073283068: BROM Mistake: STATUS_DA_HASH_MISMATCH (-1073283068), MSP ERROE CODE: 0X00

Meaning: The Download Agent (DA) file selected isn't compatible.

Solution:

  • Try using Download Agent (DA) + Auth file + Factory ROM.

Mistake 0XC50: S_DA_SDMMC_CONFIG_FAILED (0XC50)

Meaning: The device likely has a protected preloader or bootloader.

Solution:

  • Un-tick preloader when flashing in SP Wink Tool.

Error 3152: S_DA_SDMMC_CONFIG_FAILED (3152)

Meaning: The device probable has a protected preloader or bootloader.

Solution:

  • United nations-tick preloader when flashing in SP Flash Tool.

Fault 0xC0020006: ERROR: STATUS_SEC_PL_VFY_FAIL (0xC0020006)

Meaning: The device likely has a protected preloader or bootloader.

Solution:

  1. Try using a signed ROM/firmware.
  2. Try unlocking the bootloader earlier flashing.

Fault 0xC0030003: Mistake: STATUS_DA_SELECTION_ERR (0xC0030003)

Pregnant: The Download Agent (DA) file selected is incompatible.

Solution:

  1. Effort using a dissimilar Download Agent file.
  2. Endeavor using Download Agent (DA) + Auth file + Manufacturing plant ROM.
  3. Try using a different version of the Smartphone Flash Tool.
  4. For Tecno, Infinix, and Itel devices, use Software Download Tool.

Fault 0xC0030008: Fault: STATUS_INVALID_GPT (0xC0030008)

Meaning: EMMC chip is faulty on the device.

Solution:

  • Change the device'southward EMMC chip.

Error 0xC0050004: ERROR: STATUS_UPLOAD_EXCEPTION (0xC0050004)

Meaning: SP Flash Tool is unable to communicate with the device.

Solution:

  1. Endeavour flashing with/without the bombardment inserted.
  2. Effort a dissimilar USB cable.
  3. Connect the device to a different USB Port.
  4. If the higher up solutions don't work, effort using another PC.

Error 0x1: ERROR: ?? (0x1)

Significant: SP flash tool is having trouble communicating with the device.

Solution:

  • Try using a custom Download Agent (DA) and Auth file for your device model.

Error 0xC0030004: ERROR: STATUS_PRELOADER_INVALID 0xC0030004

Significant: There is a problem with the preloader partition proper noun in the scatter file or the flash tool is having problem communicating with the device.

Solution:

  1. Alter the scatter file using Notepad++ and change the partition proper noun to all lower cases. Ex: PRELOADER to preloader or to friction match the exact file name in the firmware and save the scatter file.
  2. Endeavor holding the volume up or volume downwardly button earlier connecting the telephone to the PC.
  3. If yous go an fault while trying to format, return to the download tab and tick the checkbox for the preloader, then render to the format tab and retry formatting.

Fault 1003: Error: S_INVALID_BBCHIP_TYPE (1003)

Meaning: There is a problem with the scatter file.

Solution:

  • Make sure to use SP Flash Tool compatible scatter file.

Error 0xC0010004: STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)

Meaning: The SP Flash Tool version you are using doesn't support your device or chipset.

Solution:

  1. Make sure y'all are using the latest version of the SP Flash Tool.
  2. Navigate to Options > Choice > Un-tick Storage Life Wheel Check.

Error 0xC0020005: STATUS_SEC_IMG_TOO_LARGE (0xC0020005)

Meaning: The size of a file is larger than the available segmentation size, or the file isn't verified or signed.

Solution:

  1. Ensure that the files y'all're trying to wink are actually for your device's exact model.
  2. Look for different firmware/ROM.
  3. Modify the phone's EMMC chip.
  4. Try using a different PC.

Error 0xC0070005: STATUS_DA_EXCEED_MAX_NUM (0xC0070005)

Meaning: The SP Flash Tool is having problem connecting with the phone, or you are flashing the incorrect firmware.

Solution:

  1. If yous were holding buttons, try flashing without pressing any buttons (vice versa).
  2. Try flashing a different firmware or at least the preloader from a different firmware.

These were the listing of SP Flash Tool Errors and solutions to prepare them. Do share this with your friends on Facebook, Twitter, and other social networking sites, etc., and help them in fixing SP Wink Tool Mistake they are facing.

Have nosotros missed any SP Wink Tool BROM Fault? Then do let us know in the comment department beneath.

This page may comprise affiliate links so we earn a commission. Please read our affiliate disclosure for more info.

flanneryforad1979.blogspot.com

Source: https://www.gizmoadvices.com/list-sp-flash-tool-error-codes-solution-fix/